Postamble - Microscan Mobile Hawk User Manual

Postamble

A postamble is a character or series of characters that is added to the end of a decoded
data string. Postamble characters will appear in the order that they are enabled (left to
right). For example, if you enable a space and then a comma, and then decode a symbol
containing the data 'ABC', your output will look like this:
,
ABC
The only limit to the number of postambles enabled is the total memory size available.
Important: Be sure to save all settings before reading any of
the following postamble symbols—otherwise your settings may
be lost.
Set the desired postamble by reading the appropriate symbol below.
Serial Postamble
Comma
Carriage Return
Erase All
Postamble
Data
Mobile Hawk Handheld DPM Imager User's Manual
Space
Line Feed
Note: To erase
all postamble
and preamble
data, read the
symbol at right:
Communications
Save Settings
Tab
Carriage Return
Line Feed
Erase Preamble
and Postamble
Data
4-9