Usb Interface - Microscan Mobile Hawk User Manual

USB Interface

USB Interface
USB Keyboard is the default interface in which data is transferred to a Windows-based
text program as keyboard data.
See USB Interface
USB Keyboard Mode
Data is entered as keyboard sequences. You need to read this symbol
whenever you are changing from a different interface to USB.
USB Downloader Mode
This mode is the standard way of transferring unformatted, unpacketized
data to the imager through the USB port.
USB Native Two-Way Mode
This mode is used when the user needs error-corrected communication
between the Mobile Hawk and the host the USB port.
USB Virtual COM Mode
This mode allows an Mobile Hawk in a USB configuration to function
as a virtual serial COM port. This mode requires installation of a USB
Virtual COM driver. The USB Virtual COM Port Driver can be found in
the Download Center on the Microscan website.
USB HID POS (Terminal ID 131)
This mode allows a USB-cabled Mobile Hawk to communicate as a
USB HID POS (Terminal ID 131) device.
4-4
for detailed steps on setting up the USB Interface.
Mobile Hawk Handheld DPM Imager User's Manual
Save
Settings