Minor Maintenance; Rubber Seals; Generator - Beechcraft Debonair 35-33 Pilot Operating Handbook

Section VIII
BEECHCRAFT
Debonair33 Handling, Serv- Maint
WARNING
When servicing a propeller, always make
certain the ignition switch is off and that the
engine has cooled completely. WHEN MOVING
A PROPELLER, STAND IN THE CLEAR; there is
always some danger of a cylinder firing when a
propeller is moved.
MINOR MAINTENANCE
RUBBER SEALS
To prevent sticking of the rubber seals around the
w indows, doors, and engine cowling, the seals should be
coated with Oakite 6 compound. The compound is
noninjurious to paint and can be removed by employing
normal cleaning methods.
GENERATOR
Since the generator and voltage regulator are designed for
use on only one polarity system, the following
precautionary measures must be observed when working
on the charging circuit. or serious damage to the electrical
equipment will result:
1. When installing a battery, make certain that the
ground polarity of the battery and the ground polarity
of the generator are the same.
2. When connecting a booster battery, be sure to connect
the negative battery terminals together and the
positive battery terminals together.
3. When using a battery charger, connect the positive
lead of the charger to the positive battery terminal and
the negative lead of the charger to the negative battery
terminal.
8-22
April 1982