Control Column Lock Pin; Power Plant; Engine Controls; Throttle, Propeller, And Mixture - Beechcraft Debonair 35-33 Pilot Operating Handbook

BEECHCRAFT
Debonair33
SectionVll
Systems Description
CONTROL COLUMN LOCK PIN
- 1. Rotate control wheel and move column so
th~
hole in
the bracket and the column align to accept pin.
2 . Push the control column lock pin through the hole
provided in the control column hanger and into the
hole in the control column tube assembly.
3. Ensure positive retention of the lock pin by positioning
the attached red plate on top of the throttle and
propeller controls.
WARNING
Before starting eng ine, remove the lock.
POWER PLANT
The BEECHCRAFT Debonair 33 is powered by a Conti-
nental
10-470-J
wet sump, fuel injection engine. This six-
cylinder powerplant is rated at 225 hp at 2600 rpm for
take-off and maximum continuous operation. The
10-470-
/
K engine is eligible for installation but not directly inter-
changeable with the
10-470-J
engine.
ENGINE CONTROLS
THROTTLE, PROPELLER, AND MIXTURE
The push-pull throttle, propeller and mixture controls are
located on the control console. The thrott le and propeller
controls are released for repositioning by pushing a button
on the knob. With the button extended, fine adjustments
are accomplished by rotating the knob, clockwise to
increase and counterclockwise to decrease. Do not rotate
April 1982 7-17