To Remove And Clean The Filter; Propeller Blades - Beechcraft Debonair 35-33 Pilot Operating Handbook

BEECHCRAFT
Debonair33
Section VIII
Handling, Serv - Maint
The filter assemblies on the air driven instruments should
be replaced every 100 hours under normal operating
conditions, and more often if operated under dusty
conditions.
INDUCTION AIR FILTER
This filter should be inspected for foreign matter at least
once during each 50-hour operating period. In adverse
cli matic conditions, or if the airplane is stored, preflight
inspection is recommended.
TO REMOVE AND CLEAN THE FILTER:
1. Remove the fuselage nose section grill.
2. Remove the wing nuts securing the filter and remove
the filter.
3. Clean as described in the manufacturer's instructions
on the fi lter.
PROPELLER BLADES
The daily preflight inspection should include a careful
examination of the propeller blades for nicks and
scratches.
Each blade leading edge should receive particular
attention. lt is very important that all nicks and scratches
be smoothed out and polished. The BEECHCRAFT Aero or
Aviation Center and International Distributors or Dealers
will be glad to answer any questions concerning propeller
blade repair.
April 1982
8-21