Section 1: Attaching The Wing To The Fuselage - Hangar 9 Twist 3D .40 Assembly Manual

Section 1: Attaching the Wing to the Fuselage

Required Parts
• Wing
• 1/4" x 1 3 / " wing dowel
4
• 1/4-20 x 2" nylon bolt
Required Tools and Adhesives
• 6-minute epoxy
• Flat blade screwdriver
Step 1
Locate the 1/4" x 1 3 / " wing dowel. Sand a small
4
taper on one end of the dowel to make it easier to
attach the wing to the fuselage.
Step 2
Glue the dowel into the wing using 6-minute epoxy.
Make sure there is about 1/2" of the dowel exposed.
6
• Fuselage
• Sandpaper
Step 3
Place the wing onto the fuselage. Secure the wing
using the 1/4-20 x 2" nylon bolt.