Tape Drive - Compaq Deskpro 2000 Service & Reference Manual

Tape Drive

Error
Code
1900-xx
1901-xx
1902-xx
1903-xx
1904-xx
1905-xx
1906-xx
1910-xx
Video
Error
Code
501-xx
502-xx
503-xx
504-xx
505-xx
506-xx
507-xx
508-xx
509-xx
510-xx
511-xx
512-xx
514-xx
516-xx
2401-xx
2402-xx
2403-xx
J-6 Diagnostic Error Codes
Description
ID test failed.
Servo test failed.
Format or format verification
test failed.
Sensor test failed.
BOT/EOT test failed.
Read test failed.
Write/read/compare failed.
Tape erase test failed.
Description
Graphics controller test failed.
Video memory test failed.
Video attribute test failed.
Video character test failed
Video 80 × 25 mode 9 × 14
character cell test failed.
Video 80 × 25 mode 8 × 8
character cell test failed.
Video 40 × 25 mode test failed.
Video 300 × 200 mode color set 0
test failed.
Video 320 × 200 mode color set 1
test failed.
Video 640 × 200 mode test failed.
Video screen memory page test
failed.
Video gray scale test failed.
Video white screen test failed.
Video noise pattern test failed.
Graphics controller test failed.
Memory test failed.
Attribute test failed.
Recommended Action
The following steps apply to 1900-xx through 1910-xx:
1. Replace the tape cartridge and retest.
2. Reseat and/or replace the signal cable and retest.
3. Check the switch settings on the adapter card (if
applicable).
4. Replace the tape adapter card (if applicable) and retest.
5. Replace the tape drive and retest.
6. Replace the system board and retest.
Recommended Action
The following steps apply to 501-xx through 516-xx:
1. Replace the monitor and retest.
2. Replace the graphics controller and retest.
3. Replace the system board and retest.
1. Reseat the video card (if applicable) and retest.
2. Replace the video card and retest.
3. Replace the system board and retest.
The following steps apply to 2402-xx through 2419-xx:
1. Reseat the video card (if applicable) and retest.
Continued