Technician Notes
WARNING: Only authorized technicians trained by Compaq should attempt to repair this equipment. All
troubleshooting and repair procedures are detailed to allow only subassembly/module level repair. Because
of the complexity of the individual boards and subassemblies, no one should attempt to make repairs at the
component level or to make modifications to any printed wiring board. Improper repairs can create a safety
hazard. Any indications of component replacement or printed wiring board modifications may void any
warranty.
WARNING: To reduce the risk of personal injury from electrical shock and hazardous energy levels, only
authorized service technicians should attempt to make repairs to this equipment. Do not exceed the level of
repair specified in these procedures.
Because of the complexity of the individual boards and subassemblies, do not attempt to make repairs at
the component level or to make modifications to any printed wiring board. Improper repairs could create
conditions that are hazardous.
CAUTION: To properly ventilate your system, you must provide at least 3 inches (7.6 cm) of clearance at
the front and back of the computer.
CAUTION: The computer is designed to be electrically grounded. To ensure proper operation, plug the AC
power cord into a properly grounded AC outlet only.
The installation of options and servicing of this product shall be performed by
individuals who are knowledgeable of the procedures, precautions, and hazards
associated with equipment containing hazardous energy circuits.
Additional Documentation
!"
The following documentation is available to support these products:
!"
User Documentation
!"
Technical Training Guides
!"
Compaq Service Advisories and Bulletins
!"
Compaq QuickFind
!"
Compaq Technical Reference Guide
!"
Compaq Service Quick Reference Guide
!"
Compaq Maintenance & Service Guide
!"
Compaq Quick Troubleshooting Guide
viii
About This Guide