Using Chart; 3.12.1 Displaying The Chart; The Setting Of The Chart Object To Display (Chart Menu) - JRC JMA-932B-SA User Manual

3.12
To display a chart, the chart must be beforehand imported.
The chart which can be displayed is C-MAP Ed.3 of ENC (S-57) which is a vector chart.
ARCS which is a raster chart can not be displayed.
As for the import step, refer to the instruction manual of about chart introduction.
If radar video is poor visibility caused by chart function, press the [DATA OFF] key to chart displays
temporarily off.

3.12.1 Displaying the Chart

Procedures 1
Cancellation 1

3.12.2 The Setting of The Chart Object to Display (Chart Menu)

Procedures 1

USING CHART

Left-click the
A chart is displayed.
Left-click the
The display of the chart is canceled.
Open the Chart menu by performing the menu operation below.
Chart
The Chart menu will appear.
・ Set each object.
On: Display an object.
Off: Dose not displays an object.
・ The object which it is possible to set individually is hereinafter.
Coast Line:
Safety Contour:
Danger To Navigation:
Buoys:
Land Area:
Depth Contour:
Text:
Other Object: Off
Base
Standard Display other objects including category "Standard"
button in the lower right of the screen.
button in the lower right of the screen.
Cost line
Safety contour
The dangers such as the wreck
Buoys
Land area
Depth contour
Text
Dose not displays other objects
Display other objects including category "Base"
3-103