Measurement With Electronic Bearing Line And Variable Range Marker [Ebl] [Vrm] - JRC JMA-932B-SA User Manual

4.2.2 Measurement with Electronic Bearing Line and Variable Range
Marker [EBL] [VRM]
Procedures 1 Press the [EBL1] key.
The
will be shown with a dotted line on the PPI display.
2 Move the EBL1 to the target by turning the [EBL] dial.
The EBL1 bearing will be shown in the EBL1 bearing (located at the upper right of the
radar display).
The EBL1 bearing is the bearing of the target.
3 Press the [VRM1] key.
The VRM1 (located at the upper right of the display) will be highlighted, and VRM1
will be shown with a dotted line on the PPI display.
4 Move the VRM1 to the target by turning the [VRM] dial.
The range of VRM1 from the own ship's position will be shown in the VRM1 range
located at the upper right of the radar display.
EBL1 (located at the upper right of the display) will be highlighted, and EBL1
4-22
4.2 Measurement of Range and Bearing
4