Target Tracking Function - JRC JMA-932B-SA User Manual

11.12
(1) Available range scale
(2) Acquisition
Acquisition mode
Manual Cancellation
(3) Tracking
Number of Target
Maximum tracking range : 32nm (Available all range scale)
(4) Presentation
Display mode
Azimuth mode
Vector mode
Vector Length
Past Position
Time to Display Vector : Within 1min.
Time to Stabilize Vector : Within 3min.
(5) Alarm
Auto-acquisition Zone
Setting Range
Alarm Indication
(6) Safe Limits (CPA / TCPA)
Setting Condition
Alarm Condition
Alarm Indication
Lost Target
(7) Data Indication
Target Data
Own Ship's Data
(8) Trial Maneuver
Trial Course
Trial Speed
(9) Accuracy of Display
(10) System Failure Alarm
(11) Speed Input

TARGET TRACKING FUNCTION

: All range
: Manual/AUTO
(AUTO mode uses Auto-acquisition Zone)
: Any one Target or All targets at once
: 100 Targets (AUTO Tracking)
: TM (True Motion) / RM (Relative Motion)
: North-up / Head-up / Course-up
: True/Relative Display
: Variable, 1 to 60 min. (1min. step)
: True/Relative Display
: 2 (Sector)
: 0.5 to 32nm
: Symbol on Display, Visible / Audible Alarm
: CPA
TCPA LIMIT
:
:
Status
Safe Target
Danger Target
: Symbol on Display
Visible / Audible Alarm
: Simultaneous and Continuous Display for 4 Targets
True Bearing, Range, True Course, True Speed,
CPA, TCPA, BCR and BCT
: Course and Speed
: Manual Setting
: 000.0° to 359.9°
: 0 to 100 knots
: Complied with IMO Requirement
: Visible / Audible Alarm
: Manual / Auto (LOG)
11-13
Number of Dots
Display Interval Time : 0.5 / 1 / 2/ 4 min.
LIMIT : 0.1 to 9.9 nm
: 1 to 99 min.
Safe
CPA ＞ CPA LIMIT or
Target
0 ＞ TCPA or
TCPA ＞ TCPA LIMIT
Danger
CPA ≦ CPA LIMIT and
Target
0 ≦ TCPA ≦ TCPA LIMIT
Symbol
〇 (White)
○ (Red)
: 10 points
Alarm Audible
OFF OFF
CPA／TCPA
ON