JRC JMA-932B-SA User Manual page 318

[II] Numeric data display
While an AIS-SART symbol is displayed, left-click once the symbol for the activated symbol, and then left-click once
again to change to the numeric display symbol for the AIS-SART numeric data display.
The following are Navigation Status by operating condition:
If displaying "AIS-SART TEST(15), it indicates that the AIS-SART operation test is performing.
Note: For indication the AIS-SART symbols, the Display Unit software version number is needed more than
Ver. 01.01.
For how to confirm Display Unit software version number, see to the section "8.4.1 Check Performance on
Test Menu".
[Example of AIS-SART Numeric Data Display]
Normal operation : AIS-SART ACTIVE(14)
Trial operation : AIS-SART TEST(15)
6-15