JRC JMA-932B-SA User Manual page 276

Creation of AIS Filter (Make AIS Filter)
Procedures 1
2
[I] Setting Ring Filter
3
[II] Setting Sector Filter
3
4
Note: When the automatic activation function is enabled, the filter range is automatically changed for
covering the automatic activation zone. Thus, the automatic activation zone is always within the filter
range.
Open the Make AIS Filter menu by performing the following menu
operation.
AIS
→ AIS Filter Setting
Left-click Make AIS Filter .
The mode to make an AIS filter will be activated.
Set a filter range by moving the cursor on the PPI screen, and left-click.
Set a starting bearing by moving the cursor on the PPI screen, and
left-click.
Set an ending bearing by moving the cursor on the PPI screen, and
left-click.
5-37