JRC JMA-932B-SA User Manual page 267

Cancellation 1 Press the [TX/STBY] key to stop the transmitting.
The equipment will enter the transmission standby state.
2 Left-click the item button of
displayed.
The setting items for TT Simulator will be displayed.
3 Left-click
The TT Simulator display will be turned off.
[III] Status display (Status)
The current Target Tracking status will appear.
Procedures 1 Open the TT Test Menu by performing the following menu operation.
2 Left-click the item button of
The setting items for Status will be displayed.
Off .
TT
→ TT Test Menu
Constant
VID Level TD
VID Level High
VID Level Low
Gate Size
Tracking
5-28
5.2 Target Tracking Operation
TT Simulator while the TT Test Menu is
Status .
: Vector response
: Threshold value used for automatic
acquisition
: Threshold value used for tracking
: Unused
: Size of gate used for tracking
: Number of targets currently acquired
5