Set Vertical Units; Vertical Tabulation; Set Vertical Tabulation Stops - Lexmark FORMS 249X Technical Reference

Set Vertical Units

For 249x printers only.
This command lets you set the size of the increments for the following
commands:
• Set Line Spacing for Graphics (ESC 3)
• Move Paper Vertically (ESC J).
Format
Decimal
Hex
Usage Notes
• 4 0 0 0 (decimal), 04 00 00 00 (hex) are constant digits.
• m3 and m4 designate the denominator (the lower number) of a two-part
fraction. The fraction can be 1/180, 1/216, or 1/360, and indicates the frac-
tion of an inch at which line feed spacing increments .

Vertical Tabulation

Set Vertical Tabulation Stops

Sets as many as 64 tabulation stops by line number.
Format
Decimal
Hex
Usage Notes
• Use ESC B to set the tabulation stops and to advance paper to the next ver-
tical tabulation stop (VT) to activate them.
56
Section 3: IBM Emulation Mode Printer Commands
ESC [ \
27 91 92
1B 5B 5C
m3 (Hex)
D8H
B4H
68H
ESC B tab settings
27 66 n1.....n64
1B 42 n1.....n64
4 0 0
4 0 0
04 00 00 00
m4 (Hex) Denominator
00H
00H
01H
0
0
00
0 m3 m4
0 m3 m4
m3 m4
216
180
360