Section 2 - Set Initial Conditions (Sic) Command; Sic Command Format - Lexmark FORMS 249X Technical Reference

Set Initial
Conditions (SIC)
Command
The SIC command sets the printer to the default values that were set at the
factory or to user-defined defaults.

SIC Command Format

Use the following format:
Format
Decimal
Hex
Ln is the number of parameters plus 2. Hn is 0.
The decimal and hexadecimal digits for the printer command appear below the
printer command format.
Ln Hn init ID p1...p22
ESC [ K
27 91 75 Ln Hn
1B 5B 4B Ln Hn
Section 2: Set Initial Conditions (SIC) Command
2
Section
21