Lexmark FORMS 249X Technical Reference page 104

1
2
3
4
5
6
The next example shows an alternative way to configure OS/2.
From the OS/2 prompt, enter the following command:
You can also include the following command statement in the CONFIG.SYS file
on your computer so that it runs each time you start your computer:
104
Section 6: Using the Printer Interface
Select the printer icon.
Select Open.
Select Settings. The Printer - Settings screen appears.
Select the serial port to which you want to attach the printer. The Serial
Port - Settings screen appears.
Select the settings you want to use.
Select OK.
mode com1:9600,n,8,1,,DTR=on,OCTS=on,ODSR=on
run c:\os2\mode.com com1:,,,,,DTR=on,OCTS=on,ODSR=on