Lexmark FORMS 249X Technical Reference page 22

init sets the printer to user-defined or factory settings. The value for init can be:
Initial Values
0
1
4
5
254
255
22
Section 2: Set Initial Conditions (SIC) Command
Description
Initializes printer to user-defined settings. The download font
remains unchanged. If parameters are specified, they over-
write the default settings. If the emulation mode is changed,
the download font is initialized. This command only copies
data from the selected macro, add parameter changes, if any,
and store in working RAM; the data stored in the macro's non-
volatile RAM is not affected.
Initializes printer to user-defined settings. The download font
is initialized. If parameters are specified, they overwrite the
default settings. This command only copies data from the
selected macro, add parameter changes, if any, and store in
working RAM; the data stored in the macro's non-volatile
RAM is not affected.
Initializes printer to factory settings. The download font
remains unchanged. If parameters are specified, they over-
write the default settings. If the emulation mode is changed,
the download font is initialized. This command only copies the
default settings from ROM, add parameter changes, if any, and
store in working RAM; the data stored in the macro's non-vol-
atile RAM is not affected.
Initializes printer to factory settings. The download font is ini-
tialized. If parameters are specified, they overwrite the default
settings. This command only copies the default settings from
ROM, add parameter changes, if any, and store in working
RAM; the data stored in the macro's non-volatile RAM is not
affected.
Initializes printer to user-defined settings. The download font
is initialized. If parameters are specified, they overwrite the
default settings. This command changes data stored in the
selected macro. It copies data from the selected macro, add
parameter changes, if any, and store in working RAM and in
the selected macro. It also changes the default macro to the
value of parm 3.
Initializes printer to default settings. The download font is ini-
tialized. If parameters are specified, they overwrite the default
settings. This command changes data stored in the macro's
non-volatile RAM. It copies default settings from ROM, add
parameter changes, if any, and store in working RAM and all
macros. It also sets the default macro to Disable.