Lexmark FORMS 249X Technical Reference page 156

Invalid EAN-13 command:
<x
1B5B66
0600
B2
00
00
4003
01
1B5B70
0D00
>0584454824159 ...
Since the b0 bit of the c parameter has a value of 01 (check digit by printer),
there must be 12 data characters (x0C), not 13 (x0D), specified in the Data
Transfer.
EAN-8
k value:
m value:
s value:
minimum v1, v2 values:
c parameter:
n1 value (b0 = 0):
n1 value (b0 = 1):
n2 value:
156
Section 8: Barcodes
- barcode setup command prefix
- setup data length (low byte first) -
x0006, 6
- barcode type = EAN-13
- module with = default
- space width adjustment = default
- height (low byte first) - x0340 =
832 = 0.385 inches
- control byte: check digit from host,
print human readable character,
center flag character
- barcode transfer command prefix
- data transfer length (low byte
first) - x000D, 13
179, xB3
0 to 4, x00 to x04
-3 to 3, xFD to x03
x0E, x01 (248x)
x20, x01 (249x)
available functions:
b0, check digit
b1, human readable
8, x08
7, x07
0, x00