Insufficient Collation Area; Load Media - Lexmark E120 User Manual

Insufficient collation area

Light sequence:
Error—On
Secondary light sequence:
Press twice quickly to see the secondary light
sequence.
Ready / Data—Blinks three times
Message:
Printer memory does not have the free space necessary to
collate print job. May occur due to one of the errors listed below:
• Printer memory is full.
• A page is too complex to print.
• Memory is insufficient to save what is in the print buffer.
Solution:
Turn printer off and back on to try printing the page again. If not successful:
• Press to clear message and continue processing the job (some print data may be lost).
To avoid this error in the future:
• Reduce complexity of the page by reducing the amount of text or graphics.
• Set Page Protect to On in the Local Printer Setup Utility (see Software and Documentation CD).

Load media

Light sequence:
Error—Blinking
Secondary light sequence:
Press twice quickly to see the secondary light
sequence.
Ready / Data—Blinks once
Message:
Printer is out of media, or media did not feed properly.
Solution:
• Load media into Tray 1 or priority feeder and press
• Ensure media is loaded correctly in Tray 1 or priority feeder.
• Press to cancel print job.
Using the operator panels
Overview of the Lexmark E120 operator panel
19
Primary light
sequence
Primary light
sequence
to resume.
Secondary light
sequence
Secondary light
sequence