Lexmark E120 User Manual page 41

Resource save off
Light sequence:
• Continue—On
• Error—On
Secondary light sequence:
Press twice quickly to see the secondary light
sequence.
• Continue—On
• Ready / Data—Blinking
• Error—On
Message:
Too much memory has been allocated to the print buffer.
Solution:
• Press to clear message and continue printing.
• Change the print buffer to a lesser amount, or set the print buffer to Auto (see Using the printer
resident Web page on page 43).
Short paper
Light sequence:
• Continue—On
• Error—On
Secondary light sequence:
Press twice quickly to see the secondary light
sequence.
• Continue—On
• Ready / Data—On
• Load / Remove Paper—On
• Error—On
Message:
Paper length is too short to print the formatted data. This occurs when the printer does not know the loaded media
size or when there is a problem feeding the media.
Solution:
• Make sure the loaded print media is large enough and paper size is set correctly in the Local Printer
Setup Utility paper size menu (see Software and Documentation CD).
• Press to clear message and continue the job.
• Press to cancel print job.
Using the operator panels
Overview of the Lexmark E120n operator panel
41
Primary light
Secondary light
sequence
sequence
Primary light Secondary light
sequence sequence