Insufficient collation area
Light sequence:
•
Continue—On
•
Toner Low/Replace PC Kit—On
•
Error—On
What this light sequence means:
The printer memory does not have the free space necessary to
collate the print job. This may happen due to one of these errors:
•
Memory is full.
•
A page is too complex to print.
•
A page is shorter than the set page margins.
•
Memory is insufficient to save what is in the buffer.
What you can do:
•
Press Continue
printing the job. (The job may not print correctly.)
•
Press and release Cancel
•
Press and hold Cancel
•
To avoid this error in the future:
–
Simplify the print job. Reduce the complexity of the
page by reducing the amount of text or graphics on
the page and deleting unnecessary downloaded
fonts or macros.
–
Install additional printer memory (see Adding a
memory card on page 72).
Network interface errors
Light sequence:
•
Continue—On
•
Paper Jam—On
•
Error—On
What this light sequence means:
The printer cannot establish communication with the network.
What you can do:
•
Press Continue
printing. (The previous print job may not print correctly.)
Understanding the control panel lights
to clear the message and continue
to cancel the print job.
to reset the printer.
to clear the message and continue
30