Table of Contents
Advertisement
34 Short Paper
What this message means:
The printer has determined that the length of the paper in the source specified on the second
line of the display is too short to print the formatted data. For auto-size sensing trays, this error
occurs if the paper guides are not in the correct position.
What you can do:
•
Press
to clear the message and continue printing. The printer does not automatically
Go
reprint the page that prompted the message.
•
Make sure the Paper Size setting in the Paper Menu is correct for the size paper you are using.
If MP Feeder Size is set to Universal, make sure your paper is large enough for the formatted
data.
•
Press
to open the Job Menu and cancel the current job.
Menu
35 Res Save Off
Deficient Memory
What this message means:
The printer lacks the memory needed to enable Resource Save. This message usually
indicates too much memory is allocated for one or more of the printer link buffers.
What you can do:
•
Press
to disable Resource Save and continue printing.
Go
•
To enable Resource Save after you get this message:
–
Make sure the link buffers are set to Auto, and exit the menus to activate the link buffer
changes.
–
When Ready is displayed, enable Resource Save from the Setup Menu.
•
Install additional memory.
37 Insufficient
Collation Area
What this message means:
The printer memory (or hard disk, if installed) does not have the free space necessary to
collate the print job.
What you can do:
•
Press
to print the portion of the job already stored and begin collating the rest of the job.
Go
127
Advertisement
Table of Contents
