Lexmark E120 User Manual page 80

Symptom
Uneven print density
ABCDE
ABCDE
ABCDE
Ghost Images
Specifically located ghost images
Grouped streaks along the left side
of the printed page
*
To replace the fuser, call a service technician.
†
This setting can be changed using the Local Printer Setup Utility (Windows), or through Printer Settings (Macintosh).
See Software and Documentation CD for additional information.
Troubleshooting
Cause
The toner cartridge is defective.
The Form Type setting in the printer
driver is incorrectly set.
The long-life photoconductor kit is
exhausted.
The long-life photoconductor kit is
exhausted.
Print quality problems
80
Solution
First, remove and reset the toner
cartridge. If problem persists, replace
the toner cartridge.
Make sure the Form Type setting is
correct for the paper or specialty
media used.
Replace the long-life photoconductor
kit.
Replace the long-life photoconductor
kit.