Lexmark E120 User Manual page 42

Toner low
Light sequence:
• Continue—On
• Toner Low/Replace PC Kit—On
Message:
The printer is ready to receive and process data. In addition, the toner in
the toner cartridge is getting low.
Solution:
• Press to clear message and continue processing job.
• Remove the toner cartridge. Gently shake the toner cartridge from side to side and front to back several
times to redistribute the toner, and reinsert it. Repeat this procedure multiple times. If the print remains
faded, replace the toner cartridge. See Changing the toner cartridge on page 68 for help.
Long-life photoconductor kit life warning
Light sequence:
• Continue—On
• Toner Low/Replace PC Kit—Blinks once
Message:
The long-life photoconductor kit is almost full and should be replaced soon.
Note: The Toner Alarm must be turned on from the web page
Solution:
• Press to clear the message and continue processing the job.
• Replace the long-life photoconductor kit. See Changing the long-life photoconductor kit on page 71
for help.
Using the operator panels
for this message to appear
(see Using the printer resident Web page on page 43).
Overview of the Lexmark E120n operator panel
42