Lexmark C912 User Reference Manual page 91

Menu Item Purpose
Print To specify the amount of time (in
seconds) the printer waits before
Timeout
printing the last page of a print job
that does not end with a command
to print the page. The print timeout
counter does not start until
Waiting is displayed.
Printer To establish the default printer
language used to communicate
Language
data from the computer to the
printer.
Note: Setting a printer language
as the default does not prevent a
software program from sending
print jobs that use the other
language.
Printer To determine the behavior of the
image transfer unit during printing.
Usage
Resource To determine what the printer does
with downloaded resources, such
Save
as fonts and macros stored in
RAM, if the printer receives a job
that requires more memory than is
available.
Using printer menus
Values
Disabled
1...255 (90*)
PCL
Emulation
PS
Emulation*
Max Speed
Max Yield*
Off*
On
Setup Menu
86
The printer does not print the last
page of a print job until one of the
following occurs:
• The printer receives enough
information to fill the page.
• The printer receives a Form
Feed command.
• You select Print Buffer from the
Job Menu.
The printer prints the last page
after the specified time. (Your
printer may not support the entire
range of values.)
PCL emulation, compatible with
Hewlett-Packard printers.
PostScript emulation, compatible
with Adobe PostScript language.
The image transfer unit is engaged
throughout the print job.
The image transfer unit position is
engaged based on page content.
This may extend the life of certain
print supplies.
Printer retains downloaded
resources only until memory is
needed. It then deletes those
resources associated with the
inactive printer language.
Printer retains all downloaded
resources for all printer languages
during language changes and
printer resets. If the printer runs
out of memory, 38 Memory Full
is displayed.