Lexmark C912 User Reference Manual page 58

Menu Item Purpose
Duplex To set duplexing as the default for
all print jobs. (Select Duplex from
the printer driver to duplex only
specific jobs.)
Duplex Bind To define the way duplexed pages
are bound, and how the printing on
the back of the sheet (even-
numbered pages) is oriented in
relation to the printing on the front
(odd-numbered pages).
Hole Punch To punch holes along the edge of
all printed output. (Select Hole
Punch from the printer driver to
punch holes only in output for a
specific job.)
Multipage To print a border around each
page image when using Multipage
Border
Print.
Multipage To determine the positioning of
multiple page images when using
Order
Multipage Print. The positioning
depends on the number of images
and whether the images are
portrait or landscape in orientation.
For example, if you select 4-Up multipage printing and portrait orientation, the results
differ depending on the Multipage Order value you select:
Horizontal
1
3
Using printer menus
Values
Off*
On
Long Edge*
Short Edge
Off*
On
None*
Solid
Horizontal*
Vertical
Rev Horizontal
Rev Vertical
Vertical Order
2 1 3
4 2 4
Finishing Menu
53
Prints on one side of the paper.
Prints on both sides of the paper.
Assumes binding along the long
end of the page (left edge for
portrait orientation and top edge
for landscape orientation).
Assumes binding along the short
edge of the page (top edge for
portrait orientation and left edge
for landscape orientation).
Does not punch holes in printed
output.
Punches holes in every printed
page.
Does not print a border around
each page image.
Prints a solid line border around
each page image.
Reverse
Reverse
Horizontal
Vertical Order
2 1 3
4 3 4
1
2