Lexmark C912 User Reference Manual page 108

Message
Tray <x> Missing
Unsupported Disk
USB <x>
Waiting
1565 Emul Error Load
Emul Option
2<xx> Paper Jam
30 Coating Roll
Missing
30 <color> Print Unit
Missing
32 Unsupported <color>
Cartridge
33 Tray <x>
Config Error
34 Incorrect Media
Understanding printer messages
What this message means
The specified tray is either
missing or not fully inserted into
the printer.
The printer detects an
unsupported disk.
The printer is processing data
through the specified USB port.
The printer has received a page
of data to print but is waiting for
an End of Job command, a Form
Feed command, or additional
data.
The download emulator version
on the firmware card does not
match the printer code version.
This error can occur if you
update printer firmware or move
a firmware card from one printer
to another.
The printer detects a paper jam.
The oil coating roll is either
missing or incorrectly installed.
One or more of the color print
units is either missing or
incorrectly installed.
The printer detects an
unsupported toner cartridge.
The optional Heavy Media Tray is
inserted into any tray location
except Tray 1.
The printer detects the wrong
type of media in the listed
source.
Understanding printer messages
103
What you can do
Insert the tray completely into the
printer.
See also: Loading a paper tray
• Press Go to clear the message.
• Format the disk.
Note: Disk operations are not
allowed until the disk is formatted.
Wait for the message to clear.
• Press Go to print the contents of
the buffer.
• Press Menu to open the Job Menu
and cancel the current job.
See also: Canceling Job
The printer automatically clears the
message in 30 seconds, and then
disables the download emulator on
the firmware card.
Download the correct download
emulator version from the Lexmark
Web site.
Clear the paper path.
See also: Clearing paper jams
Correctly install the oil coating roll to
clear the message and continue
printing.
Correctly install the color print units
to clear the message and continue
printing.
Replace the unsupported toner
.
cartridge
Remove the Heavy Media Tray from
the invalid location to clear the
message.
Place the requested media in the
listed source and press Go.