Lexmark C912 User Reference Manual page 115

Message
80 Fuser
Life Warning
81 Engine Code
CRC Failure
84 All Photo
Devs Exhausted
84 Black Photo
Dev Exhausted
84 Black Photo
Dev Life Warning
84 <color> Photo
Dev Abnormal
84 Color Photo
Devs Exhausted
Understanding printer messages
What this message means
The fuser is nearing its end of
life. If you do not have a
replacement fuser, order one
now. You can print approximately
500 pages before the 80 Fuser
Exhausted message appears.
Microcode in the engine flash
code module has failed a system
check.
All of the photodevelopers have
reached their end of life
The black photodeveloper has
reached its end of life.
The black photodeveloper is
nearing its end of life. If you do
not have a replacement black
photodeveloper kit, order one
now. You can print approximately
100 pages before the
84 Black Photo Dev
Exhausted message appears.
The printer has detected an
abnormal photodeveloper.
The color photodevelopers have
reached the end of their lives.
Understanding printer messages
110
What you can do
Press Go to clear the message and
continue printing. The Supplies
message is displayed until you
replace the fuser.
See also:
Replacing the fuser
Press Go to clear the message and
discard the code. Retransmit the
microcode data from the host
computer.
• Replace all of the
.
photodevelopers. Make sure you
also install the new fuser coating
roll that is included in each
photodeveloper kit.
• If the print quality is still
acceptable and you do not want to
replace the photodevelopers yet,
press Go to clear the message
and continue printing.
• Replace the black photodeveloper.
Make sure you also install the new
fuser coating roll that is included in
the black photodeveloper kit.
• If the print quality is still
acceptable and you do not want to
replace the photodeveloper yet,
press Go to clear the message
and continue printing
Press Go to clear the message and
continue printing. The Supplies
message is displayed until you
replace the photodeveloper.
Install a new photodeveloper to clear
the message and continue printing.
• Replace the color
photodevelopers. Make sure you
replace all three (Cyan, Magenta,
and Yellow) at the same time.
• If the print quality is still
acceptable and you do not want to
replace the photodevelopers yet,
press Go to clear the message
and continue printing.
.