Lexmark C912 User Reference Manual page 113

Lexmark printer user's reference
Hide thumbs Also See for C912:
Table of Contents

Advertisement

Message
58 Too Many
Bins Attached
58 Too Many Disks
Installed
58 Too Many Flash
Options
58 Too Many
Trays Attached
61 Defective Disk
62 Disk Full
Understanding printer messages
What this message means
• Too many output bins are
installed.
• An unsupported configuration
of output bins is installed.
Too many hard disks are
installed on the printer. The
printer only supports one hard
disk at a time.
Too many flash memory options
are installed on the printer.
Too many drawers with matching
trays are installed.
The printer detects a defective
hard disk.
There is not enough memory on
the hard disk to store the data
sent to the printer.
Understanding printer messages
108
What you can do
Turn off and unplug the printer.
Remove the additional output
option(s). Plug in the printer and turn
it on.
Note: To prevent an electrical
overload, plug your printer into a
well-grounded outlet on a non-
ground fault interrupter (GFI) circuit.
See also: Setup Guide
Turn off and unplug the printer.
Remove the excess hard disks from
the printer. Plug in the printer and
turn it on.
Note: To prevent an electrical
overload, plug your printer into a
well-grounded outlet on a non-
ground fault interrupter (GFI) circuit.
Turn off and unplug the printer.
Remove the excess flash memory.
Plug in the printer and turn it on.
Note: To prevent an electrical
overload, plug your printer into a
well-grounded outlet on a non-
ground fault interrupter (GFI) circuit.
Turn off and unplug the printer.
Remove the additional drawers. Plug
in the printer and turn it on.
Note: To prevent an electrical
overload, plug your printer into a
well-grounded outlet on a non-
ground fault interrupter (GFI) circuit.
• Press Go to clear the message
and continue printing.
• Install a different hard disk before
you perform any operations that
require one.
See also: Setup Guide
• Press Go to clear the message
and continue processing. Any
information not previously stored
on the hard disk is deleted.
• Delete fonts, macros, and other
data stored on the hard disk.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents