Lexmark C912 User Reference Manual page 111

Message
4<x> Unsupported
Firmware Card
40 Tray <x> Size
Sense Error
41 Open Bin 1
Exit Tray
51 Defective Flash
52 Flash Full
53 Unformatted Flash
54 Serial Option <x>
Error
Understanding printer messages
What this message means
The printer detects an
unsupported version of firmware
on the installed firmware card.
The high capacity feeder detects
an error in the size sensing
mechanism.
The printer wants to send paper
to the Bin 1 output tray, but the
tray is closed.
The printer detects defective
flash memory.
There is not enough free space
in the flash memory to store the
data you are trying to download.
The printer detects unformatted
flash memory.
The printer has detected a serial
interface error on a serial port.
Understanding printer messages
106
What you can do
• Turn the printer off, and then press
and hold Go while turning it on.
The printer reads the code on the
system card and bypasses the
code on the firmware card.
• Remove the firmware card.
See also: Setup Guide
• Turn off printer and make sure that
all the high capacity feeder
connectors are installed correctly.
• Have the high capacity feeder size
sensor checked by a service
technician.
• Open Bin 1 to clear the message
and continue printing.
• Press Go to clear the message
and continue printing. The paper
is diverted to the Standard bin.
Press Go to clear the message and
continue printing. You must install
different flash memory before you
can download any resources to
flash.
• Press Go to clear the message
and continue printing.
Downloaded fonts and macros not
previously stored in flash memory
are deleted.
• Delete fonts, macros, and other
data stored on the flash memory.
• Install flash memory with more
storage capacity.
• Press Go to clear the message
and continue printing. You must
format the flash memory before
you can store any resources on it.
• If the error message remains, the
flash memory may be defective
and require replacing.
• Make sure the serial link is set up
correctly and you are using the
appropriate cable.
• Press Go to clear the message
and continue printing. The job may
not print correctly.
• Press Menu to open the Job Menu
and reset the printer.