Advertisement
5
Fitting the burner cable
Fit the grommet.
Fit the grommet on the side opposite the combustion door hinges in compliance with the requirements of European safety
standards.
The grommet can be found in the panel instructions bag.
Fit the cable clamp to the side panel.
Fit the cable clamps on the side of the burner cable, opposite the combustion door hinges.
Connect the connector to the burner socket. Adjust the length of the cable so that it is necessary to disconnect the burner cable to open
the door of the combustion chamber.
Secure the cable. Slide the surplus cable between the insulation and the side panel.
02/11/05 - 300003690-001-A
GT/GTU 120 - GT/GTU 1200
Mounting GTU 120 - GTU 1200
27
Hide quick links:
Advertisement
