Advertisement
Mounting GT 120 - GT 1200
8
Fitting the burner cable
9
Installing the bulbs
Put the bulbs in place in the thimble tube to the rear of the boiler.
The number of bulbs varies according to the type of control panel:
2 or 3 bulbs: Use the contact spring (detail A)
4 bulbs: The contact spring is not used (detail B).
Hold the cables in place using the spring for the thimble tube.
14
Fit the grommet on the side opposite the combustion door
hinges in compliance with the requirements of European
safety standards.
The grommet can be found in the panel instructions bag.
Detail A: Control panels B, B/TA and X
- Boiler sensor
- Safety thermostat
- Thermometer (X panel only)
- Contact spring (can be found in the boiler
- Detail B: Control panels E, E1, D, E/TA, E1/TA,
- Boiler thermostat
- Boiler sensor
- Safety thermostat
- No contact spring
GT/GTU 120 - GT/GTU 1200
instructions bag)
ER/TA, E1R and D/TA Thermometer
02/11/05 - 300003690-001-A
Hide quick links:
Advertisement
