Advertisement
Mounting GT 120 - GT 1200
Installation without TAS: Panel packages FM 15 to FM 19, FM 101, FM 102 and tank package BH 72 or BH 74
Fitting the DHW sensor
Pass the sensor cable into the sheath on the DHW tank.
Introduce the DHW sensor into the holding lug on the tank inspection trap. Make the electrical connection in compliance with the control
panel instructions.
Fit the trap's thermal insulation by sliding it between the anode earth wire and the trap.
Hook on the front panel of the hot water tank.
22
GT/GTU 120 - GT/GTU 1200
02/11/05 - 300003690-001-A
Hide quick links:
Advertisement
