Preparation - Formax FD 332 Operator's Manual

(5)Preparation

Install Table 1 and 2:
Insert Table 1 on the studs indicated by (a) and (b) as shown
in the picture to the right.
Insert Table 2 on the studs indicated by (c) and (d) as shown
in the picture to the right.
Note:
When setting Table 1, be sure to put its
stopper plate at the center position.
Caution:
Be sure that both Table 1 and 2 properly fit in the positions
of the studs (a), (b), (c) and (d). If they are improperly set,
it may cause an incorrect collation, or the tables may fall out of
the machine.
Setting Paper:
Lift the auxiliary table and pull the paper
stacking table out.
Raise the paper feed table lever.
9