Conversion Failed; Error Messages On The Printer Display; Alignment Error - Lexmark 9500 Series User Manual

Conversion Failed

A
TTACHED FILE COULD NOT BE READ OR IS INVALID
Make sure the file:
•
Is in an accessible location.
•
Has the appropriate security permissions and is not read-only.
•
Is a valid file of the type indicated by its extension.
F S S
AX OLUTIONS OFTWARE DOES NOT LAUNCH PROGRAMS
When attempting to attach a file, certain software programs cannot be launched by the Fax Solutions Software
and yield an error message. If this happens, try the following:
1
Close the Fax Solutions Software.
2
Manually launch the software program used to create the file, and then open the file.
3
From the software program, click File
The Print dialog appears.
4
From the Name drop-down menu, select the printer that begins with "Fax" followed by the name of your printer,
and then click OK.
The Send Fax wizard appears.
5
Follow the instructions on the Send Fax dialog.
When you get to step 3, select Printed Document from the Documents to Send list box, and then click Next.
6
Click Send to finish sending your fax.

Error messages on the printer display

Alignment Error

These are possible solutions. Try one or more of the following:
R
EMOVE TAPE FROM PRINT CARTRIDGE
1
Remove the print cartridge.
2
Make sure the sticker and tape have been removed.
3
Reinsert the cartridge.
4
Press to align the cartridge.
For more information, see "Aligning print cartridges" on page 181.
Print.
2
Troubleshooting
250