Transferring Photos From A Memory Device To The Computer Using The Control Panel; Transferring All Photos From A Memory Card Using The Computer - Lexmark 9500 Series User Manual

Transferring photos from a memory device to the computer using
the control panel
If the printer is connected directly to a computer, or connected to a computer through a wireless network connection,
you can transfer photos from a memory card or flash drive to the computer.
Notes:
•
You cannot transfer photos from a memory device to a computer through an external network adapter.
•
The printer may require that you select a computer (and a PIN if required by that computer).
1
Insert a memory card or a flash drive that contains the images you want to transfer.
2
After the memory device is detected, press .
3
Press or repeatedly until Save Photos is highlighted.
4
Press .
5
Press or to select Computer.
6
Press .
If the computer is connected directly to the printer through a USB cable:
a
Press to begin saving photos to your computer.
b
Follow the instructions on the computer screen.
If the printer is connected to a wireless network, you will be asked to select the computer that you want to use.
a
Press or to select a computer.
b
Press .
If you set a PIN during network setup and are being asked for it:
1
Enter the PIN using the
digit.
2
Press .
c
Press to begin saving photos to the computer.
d
Follow the instructions on the computer screen.

Transferring all photos from a memory card using the computer

1
Insert a memory card into the printer with the label facing up. If the computer is connected to a wireless network,
you must select the printer.
Note: For a network connection, you must manually open the application and select the printer you want to
use.
The Productivity Studio software launches automatically on your computer.
2
Click Automatically save all photos to "My Pictures."
3
If you want to erase the photos from the memory card, click Yes.
Note: Make sure all the photos have been copied before you click Yes to erase.
4
Click Done. Remove the memory card to view your transferred photos in the Library.
and to select a digit location and the
Working with photos
116
and to select a value for that