Colors On Printout Are Faded Or Differ From Colors On The Screen; Glossy Photo Paper Or Transparencies Stick Together - Lexmark 9500 Series User Manual

M T
AKE SURE THE RUE
The font you are trying to print may not be available in the program font selection box. Not all fonts are designed
to be printed; make sure the font is a TrueType font. See the program documentation for more information.
M
AKE SURE THE DOCUMENT WAS FORMATTED OR CREATED FOR THE PRINTER
Windows may substitute different fonts. Line and page breaks may change with the font. Use the program that
created the document to fix these problems, and then save the changes for the next time you print.

Colors on printout are faded or differ from colors on the screen

Check the following. When you think you have solved the problem, test the solution by sending a document to print.
A
RE THE COLOR AND PRINT SPEED SETTINGS CORRECT
You may need to adjust the color and print speed.
A
RE THE PRINT CARTRIDGES LOW ON INK
1
Do one of the following:
•
In Windows Vista, click
•
In Windows XP or 2000, click Start.
2
Click Programs or All Programs
3
Click Solution Center.
4
If an exclamation point (!) appears on either of the print cartridges, the ink level is low. Install a new cartridge.

Glossy photo paper or transparencies stick together

D
O PHOTOS OR TRANSPARENCIES DRY AND STICK TOGETHER ON THE PAPER EXIT TRAY
Remove the photos or transparencies from the paper exit tray as they exit the printer. Allow them to dry before
stacking. It takes longer for the ink to dry on the surface of photo paper or transparencies than it does on most
printouts.
A
RE YOU USING A TRANSPARENCY OR PHOTO PAPER DESIGNED FOR AN INKJET PRINTER
For more information on the types of paper you can use with the printer, see "Choosing compatible specialty paper
types" on page 96.
T
YPE FONT IS AVAILABLE ON THE COMPUTER
?
Control Panel.
Lexmark 9500 Series.
Troubleshooting
?
210
?
?