Can Receive But Not Send Faxes - Lexmark 9500 Series User Manual

4
Check to see if On is selected.
5
If not, press or
6
Press to save.
C
HECK INK
Check the ink levels, and install a new print cartridge if necessary.
M F F
AKE SURE AX
1
From the control panel, press
2
Press .
3
Press or repeatedly until Fax Setup is highlighted.
4
Press .
5
Press or repeatedly until Ringing and Answering is highlighted.
6
Press .
7
Press or repeatedly until you reach Fax Forward.
8
Press or repeatedly until Off appears.
9
Press to save the setting.

Can receive but not send faxes

These are possible solutions. Try one or more of the following:
C
HECK MODE SELECTION
To make sure the printer is set for faxing:
1
Press or repeatedly until Fax is highlighted.
2
Press .
C
HECK DOCUMENT PLACEMENT
Load the original document facedown in the upper left corner of the scanner glass.
C D P
HECK THE IAL REFIX SETTING
1
From the control panel, press
2
Press .
3
Press or repeatedly until Fax Setup is highlighted.
4
Press .
until On appears.
ORWARDING IS NOT SELECTED
or repeatedly until Fax is highlighted.
or repeatedly until Fax is highlighted.
Troubleshooting
242