Received Fax Has Poor Print Quality - Lexmark 9500 Series User Manual

C
HECK CARTRIDGES
1
Remove the print cartridges.
2
Make sure the sticker and tape have been removed.
3
Reinsert the print cartridges.

Received fax has poor print quality

These are possible solutions. Try one or more of the following:
R
EVIEW CHECKLIST FOR SENDER
•
Check that the quality of the original document is satisfactory.
•
Resend the fax. There may have been a problem with the quality of the telephone line connection.
•
Increase the fax scan resolution.
C
HECK INK
Check the ink levels and install a new print cartridge if necessary.
D
ECREASE THE TRANSMISSION SPEED
1
From the control panel, press
2
Press .
3
Press or repeatedly until Fax Setup is highlighted.
4
Press .
5
Press or repeatedly until Dialing and Sending is highlighted.
6
Press .
7
Press or repeatedly until you reach Max Send Speed.
8
Press or to select a lower transmission speed.
9
Press to save.
10
Resend the fax.
11
If the problem persists, repeat step 1 through step 10 to resend the fax at successively lower transmission
speeds.
Note: 2400 bps is the lowest transmission speed.
or repeatedly until Fax is highlighted.
Troubleshooting
244
2