Removing The Printer From The Tray 2 Base; Cleaning The Scanner Glass; Cleaning The Exterior Of The Printer - Lexmark 9500 Series User Manual

Removing the printer from the Tray 2 base

If you need to move the printer to a different location, be sure you first remove the printer from the Tray 2 base. This
helps to avoid damaging the printer and the base.
To safely move the printer and the optional Tray 2, follow these precautions:
•
Keep the printer in an upright position.
•
Avoid severe jarring movements that may cause damage to the printer and the tray.
1
Turn the printer off, and disconnect the power cord from the wall outlet.
2
Disconnect all cables from the back of the printer.
3
Remove any paper from Tray 1 and the paper exit tray.
4
Grasp the printer on both sides using the handholds.
5
Lift the printer off of the Tray 2 base, and set the printer aside.

Cleaning the scanner glass

1
Dampen a clean, lint-free cloth with water.
2
Gently wipe the scanner glass clean.
Note: Make sure all ink or corrective fluid on a document is dry before placing the document on the scanner glass.

Cleaning the exterior of the printer

1
Make sure that the printer is turned off and unplugged from the wall outlet.
CAUTION—SHOCK HAZARD: To avoid the risk of electric shock, unplug the power cord from the wall outlet
and disconnect all cables to the printer before proceeding.
2
Remove paper from the paper tray or trays.
3
Dampen a clean, lint-free cloth with water.
Warning—Potential Damage: Do not use household cleaners or detergents, as they may damage the finish of
the printer.
Maintaining the printer
184