Printer Is Plugged In But Does Not Print; Printer Is Trying To Print To File; Printer Cannot Communicate With Computers Over Peer-To-Peer Network - Lexmark 9500 Series User Manual

M
AKE SURE THE CABLE IS NOT DAMAGED OR LOOSE
Make sure:
•
The USB cable is not damaged.
•
The light is on.

Printer is plugged in but does not print

These are possible solutions. Try one or more of the following:
M
AKE SURE THE PRINTER IS SET AS THE DEFAULT PRINTER
Try printing a test page.
M
AKE SURE THE PRINT QUEUE IS READY TO PRINT
Make sure the printer is set as the default printer and is not being held or paused.

Printer is trying to print to File

If the computer is sending the print jobs to File rather than to the printer connected to the computer, first make sure
the printer is attached with a USB cable to a USB port on the computer.
To verify the USB port:
1
Do one of the following:
•
In Windows Vista, click
•
In Windows XP, click Start
2
Right-click the Lexmark 9500 Series icon.
3
From the sidebar menu, select Properties.
4
Click the Ports tab.
5
Make sure:
•
The port is set to a USB port.
•
FILE is not set as the port.
If the document still does not print, then the USB port may not be enabled in the computer. For more information,
see "Enabling the USB port" on page 192.
Printer cannot communicate with computers over peer-to-peer
network
These are possible solutions. Try one or more of the following:
C
HECK THE STATUS OF THE HOST COMPUTER AND PRINTER
Make sure:
•
The host computer is on and is directly connected to the printer.
•
The host computer can print to the printer.
Control Panel Printers (under Hardware and Sound).
Settings Printers and Faxes.
Troubleshooting
219