Changing The Hue / Saturation Of A Photo; Changing The Gamma Value Of A Photo Or Image; Despeckling A Photo; Changing The Brightness / Contrast Settings Of A Photo - Lexmark 9500 Series User Manual

7
From the Preview area of the screen, you can see the image as it will look with the Image Enhancement settings
you have chosen. You can apply more or less contrast, flash fill, or sharpness to further alter the image. If you do
not like the results with the automatic settings, try selecting the manual settings. If you want to return to the
original image without enhancements, click Cancel.
8
ClickOK to print.

Changing the Hue / Saturation of a photo

Adjusting hue lets you control the color of an image. Adjusting its saturation lets you control the intensity of the
color.
1
From the Productivity Studio Welcome Screen, click File
2
With an image open, click the Enhancements tab.
3
Click Hue / Saturation.
4
Use the slider to adjust the hue or saturation of your photo. You can preview the changes to the image by
comparing the Before and After preview panes at the top of the window.
5
Click OK to accept your changes, or click Cancel to reject them.

Changing the Gamma Value of a photo or image

Adjusting the gamma value helps you to control the overall brightness of an image—particularly those intended to
be viewed on a computer monitor. When images are not properly gamma-corrected, they will look either too light
or too dark.
1
From the Productivity Studio Welcome Screen, click File
2
With an image open, click Advanced.
3
Type a value in the text box, or use the up or down arrows to select a higher or lower gamma value.
Note: You can enter gamma values from -10–10. If you are not satisfied with your changes, return the gamma
value back to 0.
4
Click Save to keep your changes.

Despeckling a photo

Despeckling lets you remove specks that appear in a photo.
1
From the Productivity Studio Welcome Screen, click File
2
With the image open, select Despeckle from the list under the Quick Fixes tab.
3
Using the slider, adjust the Despeckle setting. You can preview the changes to the image by comparing the Before
and After preview panes at the top of the window.
4
Click OK. The thumbnail is updated.

Changing the Brightness / Contrast settings of a photo

1
From the Productivity Studio Welcome Screen, click File
2
With an image open, click Enhancements.
Open to select the image you want to edit.
Open to select the image you want to edit.
Open to select the image you want to edit.
Open to select the image you want to edit.
Working with photos
124