11.2 Backup Configuration; Table 11-1 Filename Conventions - ZyXEL Communications Prestige 314 PLUS User Manual

Prestige 314 PLUS Broadband Sharing Gateway with 4-Port Switch
The following table is a summary. Please note that the internal filename refers to the filename on the Prestige
and the external filename refers to the filename not on the Prestige, that is, on your computer, local network
or ftp site and so the name (but not the extension) will vary. After uploading new firmware see the ZyNOS
F/W Version field in Menu 24.2.1 - System Maintenance - Information to confirm that you have uploaded
the correct firmware version. The AT command is the command you enter after you press "y" when
prompted in the SMT menu to go into debug mode.
FILE TYPE
Configuration
File
Firmware

11.2 Backup Configuration

The Prestige displays different messages explaining different ways to backup,
restore and upload files in menus 24.5, 24.6, 24. 7.1 and 24.7.2 when you use the
Option 5 from Menu 24 - System Maintenance allows you to backup the current Prestige configuration to
your computer. Backup is highly recommended once your Prestige is functioning properly. FTP and TFTP
are the preferred methods for backing up your current configuration to your computer since FTP and TFTP
are faster. You can also perform backup and restore using menu 24 through the console port. Any serial
communications program should work fine; however, you must use Xmodem protocol to perform the
download/upload and you don't have to rename the files (see section 11.1).
11-2

Table 11-1 Filename Conventions

INTERNAL EXTERNAL
NAME NAME
Rom-0 *.rom
Ras *.bin
serial/console port and when you telnet in.
DESCRIPTION
This is the configuration filename on the
Prestige. Uploading the rom-0 file replaces
the entire ROM file system, including your
Prestige configurations, system-related data
(including the default password), the error log
and the trace log.
This is the generic name for the ZyNOS
firmware on the Prestige.
Firmware and Configuration Maintenance