Figure 9-3 Menu 11.1 - Remote Node Profile; Table 9-1 Menu 11.1 - Remote Node Profile (Traffic Redirect Field) - ZyXEL Communications Prestige 314 PLUS User Manual

To configure the parameters for traffic redirect, enter 11 from the main menu to display Menu 11.1—
Remote Node Profile as shown next.
Rem Node Name= ?
Active= Yes
Encapsulation= Ethernet
Service Type= Standard
Service Name= N/A
Outgoing:
My Login= N/A
My Password= N/A
Server IP= N/A
To configure traffic redirect properties, press [SPACE BAR] to select Yes in the Edit Traffic Redirect
field and then press [ENTER].
Table 9-1 Menu 11.1 — Remote Node Profile (Traffic Redirect Field)
FIELD
Edit Traffic Press [SPACE BAR] to select Yes or No.
Redirect
Select No (default) if you do not want to configure this feature.
Select Yes and press [ENTER] to configure Menu 11.6 — Traffic
Redirect Setup.
Press [ENTER] at the message "Press ENTER to Confirm..." to save your configuration, or press
[ESC] at any time to cancel.
9.1.1 Traffic Redirect Setup
Configure parameters that determine when the Prestige will forward WAN traffic to the backup gateway
using Menu 11.6 — Traffic Redirect Setup.
Traffic Redirect
Prestige 314 PLUS Broadband Sharing Gateway with 4-Port Switch
Menu 11.1 - Remote Node Profile
Press ENTER to Confirm or ESC to Cancel.
Figure 9-3 Menu 11.1 — Remote Node Profile
DESCRIPTION
Route= IP
Edit IP= No
Session Options:
Edit Filter Sets= No
Edit Traffic Redirect= Yes
EXAMPLE
Yes
9-3