Miele H6200BP Operating And Installation Instructions page 107

Problem
F 32 appears in the
display.
F 33 appears in the
display.
F xx appears in the
display.
No water is being taken
in on Moisture plus d
function.
Possible cause and remedy
The Pyrolytic cleaning programme door lock is not
locking.
^ Turn the function selector to ß and select the required
pyrolytic cleaning programme again.
If the fault code appears in the display again call the
Miele Service Department.
The door lock for the Pyrolytic cleaning programme is
not being released.
^ Turn the function selector to ß and switch the oven off
with the K sensor.
If the door lock still does not release itself call the Miele
Service Department.
There is a problem that you cannot resolve.
^ Call the Miele Service Department.
Demo mode is activated. The oven can be operated
but the pump for the steam injection system does not
work.
Deactivate demo mode (see "Settings – P 8").
The pump for the steam injection system is faulty.
^ Call the Miele Service Department.
Problem solving guide
107