Moisture Plus Function D; Set The Number Of Bursts Of Steam; Set The Temperature - Miele H6200BP Operating And Installation Instructions

Moisture plus d

Moisture plus function d

It is quite normal for condensation to
form on the inside of the door during
steam injection. This will dissipate
during the course of the cooking
programme.
^ Prepare the food and place in the
oven.
^ Fill a suitable container with the
quantity of water specified:
Aut§:
i:
2:
3:
^ Select the Moisture plus d function.

Set the number of bursts of steam

Tip: Please refer to the sample
recipes.
Aut§ will appear in the display and the
triangle V will flash under *.
Aut§
;
The other steam burst options (i, 2, 3)
can be selected using the rotary
selector.
58
approx. ml
approx. ml
approx. 200 ml
approx. 300 ml
*
After 3, E is displayed.
This option starts the descaling
process (see "Descaling the steam
injection system F").
If you wish the burst of steam to be
injected into the oven automatically
after the heating-up phase:
^ Select Aut§.
If you wish to inject one or more bursts
of steam manually at specific times:
^ Select i, 2 or 3.
^ Touch the OK sensor.

Set the temperature

The recommended temperature will
appear in the display and the triangle
V will flash under 6.
^ If necessary, set the temperature
using the rotary selector.
^ Touch the OK sensor.
i60
°C
6
V