Auto Start; Program - Ricoh SDC326 Operating Instructions Manual

Copying

Auto Start

If you press the {Start} key during the warm-up period, the {Start} key will blink
and the machine will start copying after the warm-up period.
A
Set your copy settings during the warm-up period.
B
Press the { { { { Start} } } } key.
2
Czss010n.eps
Note
❒ To cancel Auto Start, press the {Clear/Stop} key.

Program

You can store up to five frequently used copy job settings in machine memory
and recall them for future use.
Storing your settings
A
Set the copy settings you want to put into memory.
B
Press the { { { { Program} } } } key.
Czss011n.eps
54