Auto Off Mode; Interrupt Copying - Ricoh SDC326 Operating Instructions Manual

Auto Off Mode

This machine automatically turns itself off 60 minutes after the last copy or print
job has finished. If you wish to make copies when the machine is in Auto Off
mode, press the operation switch.
Reference
For how to change the default interval that the machine waits before entering
Auto Off mode, see "Auto Timer" ⇒ P.135 "System settings".

Interrupt Copying

Use the {Interrupt} key to interrupt a multicopy run and make urgently needed
copies.
Reference
Regarding functions that cannot be used together with this function, ⇒ P.105
"Combination Chart".
A
Press the { { { { Interrupt} } } } key. The machine will stop the copy run and store the
present settings in memory before returning to the ready condition.
Czss008n.eps
B
Remove the previous originals. Set your originals for interrupt copying on
the exposure glass or in the document feeder.
C
Make your copies.
D
After interrupt copying is completed, press the { { { { Interrupt} } } } key again. The
machine will recall the previous copy settings.
E
Reset the previous originals and press the { { { { Start} } } } key to resume the previ-
ous run.
Basic Procedure
2
53