Setting A Stack Of Originals In The Document Feeder - Ricoh SDC326 Operating Instructions Manual

Setting a Stack of Originals in the
Document Feeder
You can insert a stack of originals into the document feeder. These originals are
individually fed onto and removed from the exposure glass.
Note
❒ Some originals are unsuitable for the document feeder. ⇒ P.16 "Non-recom-
mended Originals for the Document Feeder".
❒ Do not press down or hold originals after inserting them.
❒ While originals are fed from the original table to the exposure glass, do not
pull them out.
❒ Do not lift the document feeder until the original has been completely fed out.
A
Correct any curl, fold, or crease in the originals before setting the originals.
B
Make sure the Insert Original indicator is lit and the exposure glass is clear
of originals.
Trsr050e.eps
C
Adjust the guide to the original size.

Setting a Stack of Originals in the Document Feeder

1
19